This article will be divided into two main parts about how to transfer data from old Android/iPhone smart devices to Tecno Spark 9 Pro or recover deleted or lost data to Tecno Spark 9 Pro. I believe that through this article, you will have a better understanding of this.
Recently, Tecno Spark 9 Pro was unveiled, Tecno Spark 9 Pro is equipped with MediaTek Helio G85 chip, equipped with a 6.6-inch FHD + resolution 90Hz refresh rate LCD waterdrop screen. For camera, front selfie lens of 32 megapixels, rear 4800 finish pixel main camera + 2 megapixel macro lens + 2 megapixel AI lens; at the same time, the camera has a built-in 5000mAh battery and supports 18W fast charging.
After learning about Tecno Spark 9 Pro, I believe you will be attracted by its excellent performance and configuration. However, have you found an easy and effective way to transfer data files from old iPhone/Android smart devices as well as recover lost or deleted important data from your phone to Tecno Spark 9 Pro? Below, you will be introduced to 4 related methods of using Mobile Transfer and Android Data Recovery software.
In order to solve the problem of cell phone data transfer, you will be introduced to the next best multi-functional data management software – Mobile Transfer. With Mobile Transfer, you don’t have to worry about your phone not supporting the transfer, it is highly compatible and can support almost all smart devices on the market, while it can transfer more than 17 types of data; you don’t have to worry about the user’s private information being leaked, because it is highly secure and only reads the data you need to transfer. Finally, you don’t have to worry about not knowing how to use it, the Mobile Transfer software is very easy to use and enables one-touch data transfer to Tecno Spark 9 Pro.
Step 1. Download, install and run Mobile Transfer on your computer, then select “Phone to Phone Transfer” and press on “Start” button.
Step 2: Use two USB cables to connect old iPhone/Android and Tecno Spark 9 Pro to the same computer.
Tip: Please ensure that iPhone is connected to the left board and Tecno Spark 9 Pro is connected to the right panel. If the connection is opposite, click “Flip” to convert Data will be transferred from the source smartphone to the destination smartphone.
Step 3: Once the mobile phone is detected, soon all the files will be listed, select the files you need to transfer, and then click the “Start Transfer” button. It will begin to transfer.
Step 4: Click the task box to view the transmission progress.At this time,you can check whether the selected file has been transferred to Tecno Spark 9 Pro.
Step 1: Return to the homepage of mobile Mobile Transfer software, select the “Restore From Backups” module, and click the “MobileTrans” among all the items.
Tips: The program also supports other backup file types, such as Kies, iTunes, iCloud, etc., if you get other backup file, you can choose the corresponding item as you need, here we just take choosing the “MobileTrans” option as an example.
Step 2: Please connect the Tecno Spark 9 Pro to your computer using a USB cable.
Step 3: After the mobile phone is detected, the mobile transfer will load all supported file types. It supports different file types for iPhone and Android phones. Select the file to be backed up to the mobile phone, and click the “Start Transfer” button to complete the data transmission.
Note: Please do not disconnect your phone during transmission to avoid transmission interruption.
These are the two best ways to transfer data by Mobile Transfer. In addition to transferring data, it is inevitable that we will accidentally delete or lose some important files in our daily life, at this time Android Data Recovery is your best choice, it can perfectly solve all the problems you are worried about.
Android Data Recovery is a professional, efficient and secure data management software. The software has many useful features, such as data recovery, data backup and system repair. It can easily recover (on any Android) almost all data lost in your phone (except data erased by shredder), and quickly backup your phone data and fix Android system abnormalities with one click.
Step 1: Download, install and run the recovery software on the computer, and then click the “Android Data Recovery” module.
Step 2: Connect Tecno Spark 9 Pro to the computer with USB cable, and the computer will automatically detect your mobile phone.
Tip: Please remember to enable the USB debugging on your phone’s screen, then tap “OK” to go on.
Step 3: Select the file type to be recovered, and then click the “Next” button to scan the selected lost contents.
Step 4: After successful scanning, preview the lost data in the selected file. Select the required file and click the “Recover” button to start restoring data to your Tecno Spark 9 Pro.
Tip: If you can not find the data you wanted, click “Deep Scan” to re-scan your device to find more contents.
Step 1: Return to the homepage of the recovery software and click “Android Data Backup & Restore” button.
Step 2: Connect your Tecno Spark 9 Pro to your computer using a USB cable and wait for the program to detect the phone.
Step 3: Once identified, select the “Device Data Restore” or “One-click Restore” button.
Step 4: Now, select the backup files you want to restore from the list and click the “Start” button to begin extracting all recoverable files from the selected backup files.
Step 5: Select the required files and click the “Restore to Device” button to begin restoring data to your Tecno Spark 9 Pro. You can view the restoration progress on the page.
