Sync Android/iPhone to Tecno Pova Neo, Recover Data on Tecno Pova Neo

Summary: This article prepares for you some efficient and convenient ways to transfer & restore data in Tecno Pova Neo.

The Tecno Pova Neo is equipped with a 6.8-inch 720P+ waterdrop screen that supports a 120Hz refresh rate, provides a 720 x 1600 pixel HD+ resolution and a 20.5:9 aspect ratio. The Tecno Pova Neo is powered by a MediaTek Helio P22 processor with 4GB of RAM and 64GB of storage. The fuselage has a built-in 6000mAh battery and supports 18W charging. The Tecno Pova Neo is equipped with an 8-megapixel front-facing camera. Rear 13-megapixel main camera + 2-megapixel portrait lens.

When customers buys a new Tecno Pova Neo, they will need to transfer data from the old phone to the new phone. There are many ways to transfer data over the web. But those methods may have some risks, stealing information from your phone. Also, some methods have very slow transfer speeds. It takes a long time for you to transfer data. To help users transfer data efficiently and securely, I have prepared two methods for you to transfer data to Tecno Pova Neo.

Mobile Transfer is our recommended transfer tool. It is a 0 risk data transfer software. Using it to transfer data, you don’t have to worry about any information on your phone being leaked. Because Mobile Transfer will only read the data you need to transfer. Compared with other transfer software, the data types supported by Mobile Transfer are the most comprehensive and abundant. It supports up to 18 types of data to be transferred, including contacts, photos, messages, apps, music, notes, books, and more. What’s more, its operation is very simple. Just connect the device to the computer, a few clicks and you can transfer data from your old phone to Tecno Pova Neo.

down-win
down-mac

Part 1. Transfer Data from Android/iPhone to Tecno Pova Neo

Many users can’t wait to transfer data from their old phones to Tecno Pova Neo. So they need a very efficient transmission method. The method introduced in this section is very efficient. With the help of Mobile Transfer, you can use the most efficient and convenient method to complete data transfer.

Step 1: Download Mobile Transfer

Download and install Mobile Transfer on your computer, run it. Then click on the “Phone to Phone Transfer” option on the homepage and press “Start”.

Step 2: Connect the device to the computer

Then connect the old phone – Android/iPhone and Tecno Pova Neo to the computer using their USB cables.

Tip: Data is transferred from Source (Android/iPhone) to Destination (Tecno Pova Neo). “Flip” allows you to adjust the display of Source and Destination.

Step 3: Select and transfer data

In the middle of the page you can see all the data that can be transferred. Select the data you want to transfer, and click “Start Transfer” to start the data transfer process.

Part 2. Sync Data from Backup Files to Tecno Pova Neo

If the old phone is damaged or not around, you can sync the data from the backup to the Tecno Pova Neo. It should be noted that make sure that the data you need to synchronize already has backup files before synchronizing backup files.

Step 1: Launch Mobile Transfer and select “Restore from Backups” on the top of the page.

Step 2: Connect the Tecno Pova Neo to the computer using a USB cable. Then the software will automatically detect the backup files in the computer and display the backup files to the page. Select the one as you need.

Step 3: Select the file types that you need to restore. Then click “Start Transfer” to sync the data from the backup to the Tecno Pova Neo.

When using Tecno Pova Neo, you will definitely store a lot of important data in your phone. However, you may lose important data in your phone due to virus attack, broken screen, water in the phone, accidental deletion, etc. To make matters worse, your lost data might not even have a backup file. How should you recover this data? To help you recover these lost data, I have prepared two methods for you to recover from Tecno Pova Neo.

Tecno Data Recovery is a very powerful data recovery software. Whether the data in your phone is lost due to virus attack, broken screen, formatting, phone water, system problems, or accidental deletion, Tecno Data Recovery can help you restore lost data to Tecno Pova Neo. As a professional data recovery software, Tecno Data Recovery has super compatibility. It can be compatible with Tecno, Samsung, Huawei, OPPO, vivo, Meizu, Xiaomi, Redmi, Google, Lenovo, oneplus and other brands of devices. What’s more, the data types it supports to recover are very comprehensive. Whether it is contacts, text messages, photos, videos, audios, call logs and other data, Tecno Data Recovery can restore lost data to your device.

down-win
down-mac

The following two methods require the help of Tecno Data Recovery. If you have not downloaded and installed Tecno Data Recovery on your computer, please click the link above to download and install the software on your PC.

Part 3. Recover Deleted & Lost Data on Tecno Pova Neo

This part shows you how to restore data in Tecno Pova Neo without backup. If you have lost data without backup files, you can follow this method to recover lost or deleted data in Tecno Pova Neo.

Step 1: Run Tecno Data Recovery on your computer and select “Android Data Recovery” mode on the main page.

Step 2: Connect the Tecno Pova Neo to the computer using a USB cable. And enable USB debugging on the phone: Go to “Settings”, tab “Build number” for 7 times. Then back to “Settings” and choose “Developer options” > “USB debugging”. After finishing the operations on your phone, click the “OK” button to go to the next step.

Step 3: All recoverable data will be displayed on the page. Select the type of data you need to recover and click “Next” to scan your selected data.

Step 4: All scanned data is listed on the page. Preview and select the data you need to recover, then click “Recover” to recover the required data to Tecno Pova Neo.

Part 4. Restore Data from Backup Files to Tecno Pova Neo

Backup files are very important. Because it can help restore the desired data from backup to your device. If you have a backup file of your lost data, you can use this method to restore the data from the backup to Tecno Pova Neo.

Step 1: Launch Tecno Data Recovery and select “Android Data Backup & Restore” mode.

Step 2: Connect your Tecno Pova Neo to computer. The software will automatically detect your device.

Step 3: Choose “Device Data Restore” or “One-click Restore” option to according to your need.

Step 4: All backups that can be restored will be displayed on the page. Select the files you need to backup. Then click the “Start” button to extract the data from the backup file.

Step 5: All successfully extracted data will be displayed on the page. Preview and select the data you need to restore to Tecno Pova Neo. Then click “Restore to Device” to restore the selected data to your device.

Warmly tip: If the backup you want is not in the list, click “Select” to load your backup.