Sync Android/iPhone to Redmi 10 Prime and Restore Data on Redmi 10 Prime

Summary: This article will bring you some solutions to the problem of transferring data and recovering data on Redmi 10 Prime.

Redmi 10 Prime will hold a new product launch conference in India on September 3, 2021. It is equipped with a 6.5-inch FHD+90Hz display, Helio G88 processor, built-in 6000mAh battery, supports 18W fast charging, and 9W reverse wired charging. The whole machine weighs only 192 grams. It runs on MIUI 12.5 based on the Android 11 operating system. It uses a rear four-camera design, the main camera is 50 million pixels, with an 8-megapixel ultra-wide-angle lens, a 2-megapixel macro lens and a 2-megapixel make-up lens.

Redmi 10 Prime as a thousand yuan machine, the above configuration can meet daily use. It is a good choice as a backup machine. When you want to transfer data from your old phone to Redmi 10 Prime, but you want a quick and easy way? Or want to recover deleted and lost data in Redmi 10 Prime? Well, you are worth reading further and will solve these problems for you.

Part 1 Directly Sync Data from Android to Redmi 10 Prime

If you need a fast and simple transfer method, you might as well try Mobile Transfer.

Mobile Transfer has the following characteristics:

  • There are many types of data to be transferred, including but not limited to contacts, text messages, call records, photos, music, videos, applications, etc.
  • Zero data loss and high security: guarantee users All transmitted content is 100% the same as the original content, and can only be read by the user.
  • It has super high compatibility, not only can be transmitted between various Android devices, but also between iOS devices, and can also be transmitted between Android and iOS devices.
  • There are many devices supported, such as all versions of iPhone, iPad and iPod, a full range of Android tablets and Android smart phones (Redmi, Xiaomi, Samsung, HTC, LG, Sony, Google, vivo, OPPO, Huawei, Motorola, ZTE, etc.).
  • Permanently delete all the data and settings in any Android phone.
down-win
down-mac

Moreover, no matter what kind of data you want to transmit, there is no need for complicated operations, and the software will automatically complete your transmission instructions. You only need to go through 3 steps to complete the data transfer:

Step 1: First download, install and run Mobile Transfer on your computer. Please click the “Phone To Phone Transfer” mode on the main interface, and then click “Start”.

Step 2: Now, please use the USB cables to connect your old phone and Redmi 10 Prime to your computer. After the connection is successful, the old Android phone will be displayed on the left side of the main interface, and on the right side is your Redmi 10 Prime.

Note: If the order is not correct, in order to ensure that the next steps can proceed smoothly, you need to click the “Flip” button to swap the positions of the two phones.

Step 3: Next, please select the data you need to transfer in the data directory of the main interface, and click “Start Transfer” after the preview is confirmed to transfer the data to your Redmi 10 Prime. At this time, the transfer progress bar will appear on the main interface.

Note: If you want to delete the existing data of Redmi 10 Prime before transferring, you can select the “Clear data before copy” button. Please do not interrupt the connection between the phone and the computer during the transfer.

Part 2 Sync Data from Backup to Redmi 10 Prime

You can use Mobile Transfer to back up data, and it will be easier to transfer the backup data. As Android and iPhone have different backup methods, the following will introduce the transfer steps for you respectively.

down-win
down-mac

Transfer Data from Android to Redmi 10 Prime

Step 1: Run the software, then click “Restore from Backups” mode, and then click “MobileTrans” in all items.

Note: The prerequisite for selecting “MobileTrans” is that you have backed up the data in your Android phone with this Mobile Transfer software. Of course, the program also supports other backup files, such as Kies backup, iCloud backup, iTunes backup, etc. If you have any type of backup file, you can also select it.

Step 2: Please select a backup file according to your needs, and then use a USB cable to connect Redmi 10 Prime to the computer.

Step 3: After the computer detects your device, select the file type as needed, and then click “Start Transfer” to sync to your Redmi 10 Prime. At this point, you can see the transfer progress bar on the interface, please be patient.

Transfer Data from iTunes to Redmi 10 Prime

Step 1: First download and install Mobile Transfer and run it on the computer. There are four modes in the main interface, please select “Restore from Backups”, and then click “iTunes” among them.

Step 2: Now you need to connect your Redmi 10 Prime to your computer with a USB cable.

Step 3: Now, please select one of the backup files according to your needs on the left panel. The software will extract all transferable files from the selected backup file and display it to you. Please select the file type that needs to be transferred. After the computer detects your device, click “Start Transfer” to synchronize to your Redmi 10 Prime. At this time, you can see the progress bar of the transfer on the main interface.

Restore Data from iCloud to Redmi 10 Prime

Step 1: Run Mobile Transfer on the computer, then click “Restore from Backups” on the page, and finally select its “iCloud” option.

Step 2: Now, log in to your iCloud account, and then connect your Redmi 10 Prime to the computer.

Step 3: Check an iCloud backup file as needed, and then click “Download” to download it to the computer.

Step 4: After the download is complete, select the file type to be transferred, and then click “Start Transfer” to click to synchronize it to Redmi 10 Prime. You need to be patient, the speed of transmission depends on the amount of data.

Part 3 Directly Recover Data on Redmi 10 Prime without Backup

If you are using Redmi 10 Prime, the data is deleted or lost due to equipment or operation problems, and the data is not backed up, then the restoration process will be a bit troublesome. But if you choose to use Android Data Recovery, you don’t have to worry about the trouble at all, because it can help you solve the trouble very quickly.

Android Data Recovery is a third-party software that can help you recover deleted and lost data faster, more efficiently, and more safely. The main reasons for recommending it are:

  • It can recover a variety of data, such as contacts, text messages, call records, voice memos, audio, video, files, pictures, etc. All in all, as long as the data is stored on the phone, it can be restored.
  • It also has high compatibility, applicable to all Android phone brands.
  • It is very safe. It neither leaks your information nor damages your data.
  • It can not only recover deleted files, but also extract files from damaged inoperable devices and repair damaged files.
  • Simple operation and high success rate, which can save you a lot of time.
down-win
down-mac

Step 1: First download, install and run the program on your computer. After entering the program, please click the “Android Data Recovery” mode on the main interface.

Step 2: Now please connect Redmi 10 Prime to your computer via a USB cable. Immediately after that, the connection progress bar will appear on the main interface. After entering the program completely, it will automatically detect your Android version. You need to turn on the USB debugging of Redmi 10 Prime according to the steps provided by the program, and then click “OK”.

Step 3: Now, please tick the type of data you need to recover, and click “Next” after confirming. Then the program will scan your phone.

Note: Because the program needs permission to scan for deleted and lost data, if your device pops up a window, you need to follow the prompts to install the required plug-ins and agree to the relevant access authorization. If your device does not pop up such a window, please click “Retry” to try again.

Step 4: Wait for the scan to complete, the main interface displays the type of data that can be recovered. After previewing and selecting the data as you need, click “Recover”. All the selected data that needs to be recovered will be saved back to your device or computer.

Part 4 Restore Files from Backup to Redmi 10 Prime

Its function is not only to restore data, it can also back up data. In fact, as long as we back up the data, no matter what happens, restoring them will be very simple.

down-win
down-mac

Step 1: Run the program on the computer, and then click “Android Data Backup & Restore”.

Step 2: Please use a USB cable to connect Redmi 10 Prime to the computer.

Step 3: Now, the “Device Data Restore” and “One-click Restore” options appear on the main interface.

Note: If you are not restoring all the data, we recommend that you select the “Device Data Restore” mode here, because it will take less time and take up less phone memory.

Step 4: Now, please select the backup you need from the backup list, and then click “Start” to extract the recoverable files.


Wait for all the contents to be extracted, select the required files, and then click “Restore to Device” or “Restore to PC” to restore them.